The Ford Barn - View Single Post

700rpm · 01-10-2021, 10:55 AM

If you have an original rounded manifold setup that cover should set down lower on the exhaust manifold. Something isn’t right. Can you post a picture of your manifolds w/o the cover, and a picture of both sides of the cover?

If, however, you have what Al in NY describes, his advice is correct. You’ll never make the cover you have work with a waffled manifold.

01-10-2021, 10:55 AM	#11
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,902	Re: AutoLite heater install If you have an original rounded manifold setup that cover should set down lower on the exhaust manifold. Something isn’t right. Can you post a picture of your manifolds w/o the cover, and a picture of both sides of the cover? If, however, you have what Al in NY describes, his advice is correct. You’ll never make the cover you have work with a waffled manifold. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.