The Ford Barn - View Single Post

700rpm · 01-09-2021, 10:40 PM

I don’t think there is any official way. I don’t connect mine to the heater door in the firewall. I have found it adds one more rattle. Others use a piece of radiator hose to fill the gap, but I haven’t found that necessary. Winters are pretty mild in Portland.
I do remove the cover in the summer.

01-09-2021, 10:40 PM	#2
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,906	Re: AutoLite heater install I don’t think there is any official way. I don’t connect mine to the heater door in the firewall. I have found it adds one more rattle. Others use a piece of radiator hose to fill the gap, but I haven’t found that necessary. Winters are pretty mild in Portland. I do remove the cover in the summer. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. Last edited by 700rpm; 01-09-2021 at 11:18 PM.