The Ford Barn - View Single Post

Ian NZ · 09-09-2019, 11:13 PM

Is it o/k to run a Stromberg 48 carburettor on a late 3-3.16" inch bore Ford V8 engine as originally they were fitted to the 3-1/16" inch bore 1934 Ford V8 engines.

09-09-2019, 11:13 PM	#1
Ian NZ Senior Member Join Date: May 2010 Location: Taranaki, New Zealand Posts: 922	Stromberg carburettors Is it o/k to run a Stromberg 48 carburettor on a late 3-3.16" inch bore Ford V8 engine as originally they were fitted to the 3-1/16" inch bore 1934 Ford V8 engines.