Quote:
Originally Posted by 40ford
I am afraid to do the jumper might create other issues.With headlights on at the breaker I have 6 volts coming in and 4.74 volts out if I am checking correctly?
|
If you have 6v into the CB and 4.74 out there is a major issue with the CB. You could try checking the resistance through the CB. But, IMO, you ether need to check it or replace it. Not sure how easy it is to find a NOS CB, but be careful about new parts that include the ballast resistor, most of the new ballast resistors are total junk.