07-13-2022, 10:55 AM
|
#44
|
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,817
|
Re: toe in tool
Quote:
Originally Posted by Bill Z
With toe plates, you are using two separate measuring points, front and rear , while stationary. The accuracy of the toe measurement is wholly dependent on the condition of the wheels/tires. Any imperfection/bulge in the sidewall of the tire or bend/runout of the wheel will directly affect the results.
Respectfully,
Bill Z
|
The toe plates only touch the wheel so "Any imperfection/bulge in the sidewall of the tire" does not effect the use of the tool.
A bent wheel is going to effect the way the car handles no matter what method you use.
|
|
|