Re: Seat belts is a 1930 Coupe
During my installation, I mounted the center seatbelts of my ‘30 coupe with a bracket I fabricated from 3” wide X 3/16 steel with 1”X 3/16” stiffeners. The outer belts were mounted with nut plates that I slid between the sub rails and the splash shields after drilling holes for the bolts, then pop riveting them in place. Cut outs in the curved lower seat pan, to allow the belts to pass through, we’re finished with vinyl edging. It’s important that the seat belts have a straight path from the mounts to your lower body when in use.
Bill Z
|