The Ford Barn - View Single Post

qmdv · 08-24-2020, 05:57 PM

Then let me try again. I have offy 375 heads. With exhaust valve fully open there is .615 between the top of the exhaust valve and the spark plug mating face on top of the heads. If I used 3/4 reach plugs with a .125 spacer, the plug would interfere with the valve and that would be bad news. I was hoping that somebody had some help they good give. This task would be a lot easier if I had heads with deeper combustion chambers.

08-24-2020, 05:57 PM	#52
qmdv Senior Member Join Date: Dec 2012 Location: Payette, ID Posts: 936	Re: AutoLite 216's in Offy heads Then let me try again. I have offy 375 heads. With exhaust valve fully open there is .615 between the top of the exhaust valve and the spark plug mating face on top of the heads. If I used 3/4 reach plugs with a .125 spacer, the plug would interfere with the valve and that would be bad news. I was hoping that somebody had some help they good give. This task would be a lot easier if I had heads with deeper combustion chambers.