Thread: Starter failure
View Single Post
Old 10-04-2020, 10:33 AM   #19
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: Starter failure

Try the starter with the ignition switch off . If the starter turns normal with the switch off but drags with tthe ignition on , the timing is too advanced . Also check points gap . If points gap is over twenty two thousands it will cause the timing to be too advanced .
Purdy Swoft is offline   Reply With Quote