David,
Thanks. That water pump may need some attention? Good talking with you today.
So the seats progress a little.
Will trim the corners after the glue dries on the luan plywood. Slso added additional Kreg pocket screws since I will not be inseting the plywood. Now two in each joint. The plywood was nailed to the frame with small brads from a air nailer. Should be stroung enough for anothe 100 years!
Rain again today, our view to the west from the shop setting behing the 32:
Also removed the engine from the transmission. Next will be the clutch and pressure plate.
Regards,
Chris