The Ford Barn - View Single Post

Terry,OH · 09-22-2020, 06:20 AM

I am confused, the hub is the center part of the syncro and the syncro sleeve is the outer part. On the early syncro with 6 steel balls the hub moves on the splined shaft and the later syncros with blocker rings the hub does not move. What syncro are you talking about??? Are you talking about the sleeve?

If your going to install a 2nd gear shift stop on the transmission top, you may want to consider placing the bolt lock nut on the outside of the top instead of inside IMO.

09-22-2020, 06:20 AM	#9
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: syncro hub position for second I am confused, the hub is the center part of the syncro and the syncro sleeve is the outer part. On the early syncro with 6 steel balls the hub moves on the splined shaft and the later syncros with blocker rings the hub does not move. What syncro are you talking about??? Are you talking about the sleeve? If your going to install a 2nd gear shift stop on the transmission top, you may want to consider placing the bolt lock nut on the outside of the top instead of inside IMO.