The Ford Barn - View Single Post

earlyride · 09-13-2020, 10:46 AM

Just a thought, how tight is the hub and pulley onto the crank? with the added load of the blower and if it's not a tight enough fit it might cause some wobbling and loosening of the bolt that holds it in place.

09-13-2020, 10:46 AM	#9
earlyride Senior Member Join Date: May 2010 Location: Petaluma, cal. Posts: 132	Re: Crank pulley bolt...Lost again!! Just a thought, how tight is the hub and pulley onto the crank? with the added load of the blower and if it's not a tight enough fit it might cause some wobbling and loosening of the bolt that holds it in place.