Quote:
Originally Posted by 1931 flamingo
"not reading in the green going down the road about 60mph."
What's the fix for this ?? I also have this problem. Gen and regulator have been gone through.
Paul in CT
|
You would first have to determine if it is the Generator/Regulator output or the gauge that is the issue. Sounds like you have checked the Gen/Reg, so most likely it is the gauge. Is the wiring to the gauge and the gauge ground in good shape? I would take a voltage reading at the gauge and see what you get, should be somewhere a little above 7 voltage with the engine rpms up. (this all assumes were are talking a voltage meter and not an ampmeter here)