The Ford Barn - View Single Post - Does anyone have a print on A-7522-B Trunnion??

BRENT in 10-uh-C · 04-09-2020, 02:12 PM

Sponsored Links (Register now to hide all advertisements)

Since Benson is closed for awhile, does anyone have a copy of the A-7522-B print that could give me an exact O.D. of the Trunnion?

The A-7520 Clutch Pedal print calls for the Trunnion hole to be reamed to 0.6240 - 0.6255, so I am needing to know what the spec is supposed to be on the Trunnion. I am whether to fabricate a run of O/S Trunnions where we can ream the Clutch Pedal to oversize to take up the wear/slack the Pedal Trunnion holes instead of welding up the hole and redrilling.

TIA

04-09-2020, 02:12 PM	#1
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,527	Does anyone have a print on A-7522-B Trunnion?? Sponsored Links (Register now to hide all advertisements) Since Benson is closed for awhile, does anyone have a copy of the A-7522-B print that could give me an exact O.D. of the Trunnion? The A-7520 Clutch Pedal print calls for the Trunnion hole to be reamed to 0.6240 - 0.6255, so I am needing to know what the spec is supposed to be on the Trunnion. I am whether to fabricate a run of O/S Trunnions where we can ream the Clutch Pedal to oversize to take up the wear/slack the Pedal Trunnion holes instead of welding up the hole and redrilling. TIA __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .