The Ford Barn - View Single Post

Tim Ayers · 08-28-2019, 07:34 AM

Stock throw out bearing should work if using stock transmission.

Headers can be a mixed bag. Sometimes it takes some jockeying around to make the work. Since its a fendered car and you can't see them out in the open, I would call Red's Headers.

Good luck and keep us posted. Sounds like a stout motor you've got there.

Edit: I just saw you want a Vega box? All mods need to be installed before you run the exhaust.

08-28-2019, 07:34 AM	#3
Tim Ayers Senior Member Join Date: May 2010 Location: NJ Posts: 6,181	Re: Throw out bearing questions Stock throw out bearing should work if using stock transmission. Headers can be a mixed bag. Sometimes it takes some jockeying around to make the work. Since its a fendered car and you can't see them out in the open, I would call Red's Headers. Good luck and keep us posted. Sounds like a stout motor you've got there. Edit: I just saw you want a Vega box? All mods need to be installed before you run the exhaust.