Thread: heads
View Single Post
Old 04-06-2017, 09:46 AM   #7
Ol' Ron
Senior Member
Ol' Ron's Avatar
Join Date: May 2010
Location: Chester Vt
Posts: 7,632
Default Re: heads

Now if your going to use a hi lift cam like the L-100, the head will have to be clearanced . Also, regardless of the head you use the piston to head clearance should be .045/.050" to increase the turbulence in the chamber. This will improve throttle response and economy.. Just remember there's a reason why you do things and some of the choices have an affect on other things. There's a differance between building an engine and putting one together.
Ol' Ron is offline   Reply With Quote