The Ford Barn - View Single Post

Synchro909 · 02-23-2020, 04:53 PM

The original hubs were of such poor quality. I can't see the new ones being worse.
Everybody who has had anything to do with a worn hub will know that they wear at the outer end of the bearing area in a bell shape. That is because Henry's hardening process didn't do the job properly down inside the hub. I'm not impressed in a good way by the originals.

02-23-2020, 04:53 PM	#5
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: New reproduction rear hub and drum The original hubs were of such poor quality. I can't see the new ones being worse. Everybody who has had anything to do with a worn hub will know that they wear at the outer end of the bearing area in a bell shape. That is because Henry's hardening process didn't do the job properly down inside the hub. I'm not impressed in a good way by the originals. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.