Quote:
Originally Posted by FRANK PKNY
I'm beginning to understand now. Thanks Any idea on how to adjust the kick down switch on the throttle pedal? The person who set this up had all the wires incorrectly placed, I'm rewiring from ground zero . At present the kick down switch is not touching the push section of the throttle when pressed to the floor, I'm assuming the shaft on the end of the switch is adjustable by screwing it in or out, I just need to know at what point it needs to engauge the switch. Thanks again.
|
You want to have the carb wide open with the gas pedal just touching the kickdown switch plunger, so that a little extra nudge with your foot pushes in the plunger.