Re: 2 Tooth Steering Sector
Quote:
Originally Posted by David R.
Mine was not easy at all to get off or on. I had to resort to fire wrench. I made a special press set up with a hollow pipe and hydraulic jack. I packed sand around it to keep hollow shaft from deforming.
|
FWIW, I've found that square tubing works well when working w/long objects in a press. It take a heck of a lot more force to deform the square tubing compared to pipe.
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
Last edited by katy; 07-23-2021 at 10:06 AM.
Reason: Addition
|