The Ford Barn - View Single Post - Nu-Rex Electronic Ignition Help

GeneBob · 07-14-2021, 10:17 PM

Here is the problem. If you left the ignition key on for an extended period of time while you were troubleshooting, you may have killed the ignition module. Anyway, FSI Ignition is the current builder of these systems. They are in Oklahoma.
As far as no spark, make sure the rotor is rotating, the electronic ignition has a fuse between the battery connection and the system. The ignitor pickup is replaceable and available from FSI if you don't have a spare.

07-14-2021, 10:17 PM	#4
GeneBob Senior Member Join Date: May 2017 Location: Denver Area Posts: 433	Re: Nu-Rex Electronic Ignition Help Here is the problem. If you left the ignition key on for an extended period of time while you were troubleshooting, you may have killed the ignition module. Anyway, FSI Ignition is the current builder of these systems. They are in Oklahoma. As far as no spark, make sure the rotor is rotating, the electronic ignition has a fuse between the battery connection and the system. The ignitor pickup is replaceable and available from FSI if you don't have a spare.