Quote:
Originally Posted by CA Victoria
I re measured with my new caliper and have the same measurement (added: as post 7 & 8).
With limited options to save a block any thoughts on options?
(Added: I’m getting .995)
|
Hi, Tim
If you're getting .995 when you measure, your lifters are .005 smaller in diameter than the .999 ( I dropped the "5" from .9995 for clarity sake) the others have mentioned. Is this maybe the problem?
Terry
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"
302