The Ford Barn - View Single Post - exhaust gasket

rotorwrench · 05-02-2011, 07:53 PM

The ones for the 8BA and 8CM pipe to manifold should be available through NAPA. The part number is for the old L-6 engine 1GA-9450 but will fit most 8BA/8CM types. The cross over pipe gaskets are a different part number.

The 18-9448-A for 32 to 48 cars should be available in the exhaust manifold gasket sets 18-9433 that are available through Macs, C&G, Carpenter's, Van Pelts, or any number of other early Ford V8 parts vendors. Best gasket sets should also have them in their sets.
Kerby

05-02-2011, 07:53 PM	#2
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,472	Re: exhaust gasket - manifold to tailpipe The ones for the 8BA and 8CM pipe to manifold should be available through NAPA. The part number is for the old L-6 engine 1GA-9450 but will fit most 8BA/8CM types. The cross over pipe gaskets are a different part number. The 18-9448-A for 32 to 48 cars should be available in the exhaust manifold gasket sets 18-9433 that are available through Macs, C&G, Carpenter's, Van Pelts, or any number of other early Ford V8 parts vendors. Best gasket sets should also have them in their sets. Kerby