View Single Post
Old 11-12-2014, 11:59 AM   #131
Slotblog
Senior Member
 
Slotblog's Avatar
 
Join Date: May 2014
Location: Norcross, GA
Posts: 242
Default Re: Oregon to Georgia in a 1930 Standard Tudor

Mike,

This dist is so loosey-goosey in the block, I'm going to pull it and go through it. Betcha the bushings are shot as well.

Will probably convert to the Pertronix unit, too.

There's a good chance I changed the timing via clumsiness while setting the point gap.

Last edited by Slotblog; 11-12-2014 at 04:11 PM.
Slotblog is offline   Reply With Quote