The Ford Barn - View Single Post - Oregon to Georgia in a 1930 Standard Tudor

Tom Wesenberg · 11-09-2014, 04:52 AM

BTW, if the cutout is bad you can use a short jumper wire between the input and output terminals to get home. Just be sure to remove the jumper when the engine isn't running.

The same thing goes for a bad ammeter, just jump a wire between the two terminal box wingnuts.

11-09-2014, 04:52 AM	#113
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Oregon to Georgia in a 1930 Standard Tudor BTW, if the cutout is bad you can use a short jumper wire between the input and output terminals to get home. Just be sure to remove the jumper when the engine isn't running. The same thing goes for a bad ammeter, just jump a wire between the two terminal box wingnuts.