The Ford Barn - View Single Post

Sparky · 11-21-2013, 01:31 PM

The usual way is to re-bend the spring cold. I've never done it but the two methods Ive come across are using a hydraulic press or just a big hammer.

11-21-2013, 01:31 PM	#88
Sparky Senior Member Join Date: May 2010 Location: Rhode Island Posts: 649	Re: Speedster Kit The usual way is to re-bend the spring cold. I've never done it but the two methods Ive come across are using a hydraulic press or just a big hammer.