Quote:
Originally Posted by Chris Haynes
I am still in the process of gathering parts for this. I have the '32-'36 front axle, '46 spindles and brakes. Now is the time for gathering hardware. Specifically the King Pins and Kit. Which should I use?
|
Here, (as wherever possible) you want to use the king pin kit to match the spindles you are using so that the kingpins are the right length and the slot for the locking pin is in the proper location. The 46 spindles will bolt onto the Model A axle using the 46 kingpins and the bearing placed on the bottom as it was originally for '46.
Do you have a plan for steering? Shocks? Rear brakes? Master cylinder, etc., etc.. Lots involved in this changeover.