The Ford Barn - View Single Post

Mart · 04-27-2020, 06:43 PM

I used an old wrist pin in one of the crank balance holes. That worked well to stop it turning. I used 65 - 70 ft lbs as the figure.

04-27-2020, 06:43 PM	#10
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,754	Re: Torque for Flyeheel to crank bolts? I used an old wrist pin in one of the crank balance holes. That worked well to stop it turning. I used 65 - 70 ft lbs as the figure. Last edited by Mart; 04-27-2020 at 06:49 PM.