The Ford Barn - View Single Post

Mike_V8 · 02-03-2020, 02:18 PM

Hi all,
bought a 1946 Ford Coupe last summer. When I got the car there was no trackbar and no swaybar in it. I bought all the missing parts from different sellers. Also choosed the pearch bolts from a 1939 with only one eye. Now the swaybar doesn't fit to mounting holes of the pearches. It is about 2inches to narrow. For me it seams that the swaybar has been bent to fit another frontend. But I'm not sure.
Can anybody help me with the original width of the swaybar? Measured from eye to eye on the inside for example? Would be great help.

Greetings from Germany!

02-03-2020, 02:18 PM	#1
Mike_V8 Junior Member Join Date: Dec 2012 Posts: 11	swaybar measurement Hi all, bought a 1946 Ford Coupe last summer. When I got the car there was no trackbar and no swaybar in it. I bought all the missing parts from different sellers. Also choosed the pearch bolts from a 1939 with only one eye. Now the swaybar doesn't fit to mounting holes of the pearches. It is about 2inches to narrow. For me it seams that the swaybar has been bent to fit another frontend. But I'm not sure. Can anybody help me with the original width of the swaybar? Measured from eye to eye on the inside for example? Would be great help. Greetings from Germany!