The Ford Barn - View Single Post

rotorwrench · 09-18-2018, 05:08 PM

The Sno Go is a 4WD so it can't use a 2-speed axle unless some company makes one for 4WD front end and I've never heard of one. These old trucks use the old Timken axles on both ends with the front one being modified by Marmon Herrington to work for 4WD.

There are other 5 and 6-speed transmissions but most of the newer ones don't have a removable bell housing so they would be very difficult to adapt.

09-18-2018, 05:08 PM	#38
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,436	Re: 43 Marmon Herrington 4x4 top speed The Sno Go is a 4WD so it can't use a 2-speed axle unless some company makes one for 4WD front end and I've never heard of one. These old trucks use the old Timken axles on both ends with the front one being modified by Marmon Herrington to work for 4WD. There are other 5 and 6-speed transmissions but most of the newer ones don't have a removable bell housing so they would be very difficult to adapt.