Quote:
Originally Posted by grumppyoldman
You can take the floor pan screws out. lift it up as high as you can. Look up high on the back of the bell housing (it's hard to see) the no. should be the same as your VIN that is stamped on the driver's side of the frame. Mine is the same and it'[s a 221 CI, 90 HP., but it has been overhauled, so the HP. could have been changed. It's green also, and has an A cast in the center of the heads. Al
|
Nope. No number on the block.
Rather, the number was stamped in to the transmission housing.