View Single Post
Old 01-04-2015, 08:16 PM   #5
Senior Member
Rocketsled's Avatar
Join Date: May 2010
Location: Wakefield, N.H. USA
Posts: 142
Default Re: Slip Plate/Dry Moly Application

Dry Film Moly has a resin binder to hold it in place until it gets worked in, usually on cam followers, latches and slides. It is mostly used for roller chain lubrication that will not attract lint or dust in textile machine applications.
Alternately, you could apply Molykote Z Powder on spring leaves and burnish it into the steel, or use
G-N Paste which is 50/50 Moly and oil, but is very messy. Use this on camshafts and lifters.
Moly works best when applied in several applications, always working it into the surfaces between coats.
Rocketsled is offline   Reply With Quote