Re: HELP! This is a puzzle
Coil-Remove high tension wire from the distributor.With the key on turn over the engine,with the lead held close to the block a spark should occur. If not the problem is in the coil or the wiring to the coil. Or Condenser check remove the cover and cap of the distributor-with the key on place a screwdriver between the points-If you have spark, fine, but if not you have problems with condenser or wires leading to the distributor. If no spark to the plug straps-Problem is in the distributor back.
Last edited by Gary WA; 09-06-2014 at 08:59 PM.
|