The Ford Barn - View Single Post

Rocketsled · 09-12-2014, 03:15 PM

You could install a 'Speedi Sleeve' on the axle to provide a new surface for the oil seal.
Put some threadlocker or retaining compound on the axle first, to prevent any leak
path under the 'sleeve'.

09-12-2014, 03:15 PM	#5
Rocketsled Senior Member Join Date: May 2010 Location: Wakefield, N.H. USA Posts: 142	Re: Acceptable rear axle wear You could install a 'Speedi Sleeve' on the axle to provide a new surface for the oil seal. Put some threadlocker or retaining compound on the axle first, to prevent any leak path under the 'sleeve'.