The Ford Barn - View Single Post - Same Clutch noise problem after third assembly and a lot of archive searches

flatheadmurre · 04-26-2020, 07:37 AM

Crankshaft is floating so doesn´t take much force to move it axial...and it´s not easy to see the tiny movement.
Put dial indicator on it and see if you can move it forward and back...
Next step is probably to get the flywheel off and see if you can track down anything that has been rubbing on each other...

04-26-2020, 07:37 AM	#11
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: Same Clutch noise problem after third assembly and a lot of archive searches Crankshaft is floating so doesn´t take much force to move it axial...and it´s not easy to see the tiny movement. Put dial indicator on it and see if you can move it forward and back... Next step is probably to get the flywheel off and see if you can track down anything that has been rubbing on each other...