Quote:
Originally Posted by henry's 31
Hi:
Did the splash guard go under the floor in top of the chassis?
|
Not sure what you mean by "splash guard". The top of the box mounts to the underside of the floor. The top is about 1/2 to 3/4 inch wider on the sides that form a flange that bolts to the floor. This where the blue clamps are holding it in place in the pic. Bolts come down from top and nuts on the flange side.
The back sill (wood) has a slot cut into the bottom side for the lock to turn into the wood. when it catches the metal box. Hope that makes sense.
The bolts are carriage and the heads can be seen from the top of the floor. I can dig it out of storage in a few days and get better pics and dimensions.
Jon.