The Ford Barn - View Single Post

demingboy · 10-21-2020, 08:14 PM

Re: king pin replace
My choice would be to just replace the king pins and bushes. Nothing is to be gained by replacing the spindles unless they are dropped spindles to lower the front.
Oh ok. I tought it would be easier to fit new king pins in new spindles. Must not be, and I could save a buck. I had read where somebody stated that original ford pins were better than newer offering. Not sure why but they are quite a bit more expensive. Hopefully I can use the speedway set up and be fine.

10-21-2020, 08:14 PM	#4
demingboy Member Join Date: Oct 2020 Location: Cozumel and Deming N.M. Posts: 87	Re: king pin replace Re: king pin replace My choice would be to just replace the king pins and bushes. Nothing is to be gained by replacing the spindles unless they are dropped spindles to lower the front. Oh ok. I tought it would be easier to fit new king pins in new spindles. Must not be, and I could save a buck. I had read where somebody stated that original ford pins were better than newer offering. Not sure why but they are quite a bit more expensive. Hopefully I can use the speedway set up and be fine.