The Ford Barn - View Single Post

1955cj5 · 03-10-2016, 10:37 PM

I think if I were you I'd continue with the original plan for now.

But maybe not spend a lot on parts just yet..

Continue to disassemble and inspect and see what you find.

If there are no other serious problems you or someone else might come up with an idea to repair what you have....just thinking out loud but maybe you could turn down the drive housing and insert some sort of shouldered bushing in the block..

03-10-2016, 10:37 PM	#12
1955cj5 Senior Member Join Date: Apr 2015 Location: Boise, Idaho Posts: 1,578	Re: Oh No! Now how am I going to fix this! I think if I were you I'd continue with the original plan for now. But maybe not spend a lot on parts just yet.. Continue to disassemble and inspect and see what you find. If there are no other serious problems you or someone else might come up with an idea to repair what you have....just thinking out loud but maybe you could turn down the drive housing and insert some sort of shouldered bushing in the block.. __________________ Early '29 CCPU that had a 4-speed, but not any more.......in the family since '62