The Ford Barn - View Single Post - Snap-On spring spreader

Mitch//pa · 11-19-2016, 09:28 PM

You should put c - clamps around the spring pack on both sides.. if that little center bolt cut loose yo lose yo teeth..those smaller leafs are under extreme pressure..
Safety Chaining the outer sides to the axle housings is not a bad idea either

11-19-2016, 09:28 PM	#2
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: Snap-On spring spreader You should put c - clamps around the spring pack on both sides.. if that little center bolt cut loose yo lose yo teeth..those smaller leafs are under extreme pressure.. Safety Chaining the outer sides to the axle housings is not a bad idea either Last edited by Mitch//pa; 11-19-2016 at 09:52 PM.