Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Vergil
From gasket kit
GraphTite Rope Rear Main Seal Installation
(general Instructions - not applicatuion specific)
* This Graphtite rope seal is of proven, superior quality,
however, careful attention must be paid when trimming
to avoid fraying.
* Do not pre-soak in oil
* Press rope into place. Use a smooth rod, like a socket
extension, to press in and compact rope to approximate
the crankshaft seal journal diameter.
* Trim rope about .015" beyond flush using spacer. Cut
through rope and slightly into wood stick to ensure a
clean cut. (stick, spacer, and knife provided)
* Press protruding ends of rope down flush. Push any
loose strands toward the center of rope end. Apply
startup lube to rope surface.
* Coat all cap to block mating surfaces with sealant. DO
Not apply sealant on rope ends.
Vergil
|
Hi!
Ok, it is very interesting what you say, I think that I have not more questions.
Thank for your help!!!
Hary