Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by ron103140
Paul, those do look like 30-31 ford rumble seats for standard roadster. The only thing I see that you may have a problem with is on the seat back the tabs that hold the bottom secure are it looks like should be bent straight so you can put in the screws that go into the D nuts.
|
Thanks for the reply's. As for seat back. The tabs on these springs are bent in because the seat back is long enough to reach the bottom of the lid. It wraps around the edge perfectly however there are no D-nuts on the bottom and I haven't seen any reference to the seat mounting to the bottom of the deck lid on any 30-32 cars. So at the least I think the back seat is not for a model A. Also having the seat back approximately 4 inches longer than it should be doesn't allow the bottom seat to be back where it needs to be. The question I now have is what year and model is this seat back for. And of course I now need to find a proper seat back spring.