The Ford Barn - View Single Post - 31-32 Ford rumble seat springs

Marco Tahtaras · 05-23-2015, 12:21 PM

That is an early 1930. It's possibly a Coupe body built by Briggs. Look on the firewall on the right side where the patent plate should be for a second plate or a pair of holes below the four holes for the Ford plate.

All new reproduction floor pans have been installed. Some parts such as deck lid lower stops are missing. The seat riser is also missing the holes for the two lower spring catches or loops to snap into. Correction, I see the stops at least.

05-23-2015, 12:21 PM	#2
Marco Tahtaras Senior Member Join Date: May 2010 Posts: 3,099	Re: 31-32 Ford rumble seat springs That is an early 1930. It's possibly a Coupe body built by Briggs. Look on the firewall on the right side where the patent plate should be for a second plate or a pair of holes below the four holes for the Ford plate. All new reproduction floor pans have been installed. Some parts such as deck lid lower stops are missing. The seat riser is also missing the holes for the two lower spring catches or loops to snap into. Correction, I see the stops at least. __________________ http://www.abarnyard.com/