The Ford Barn - View Single Post

Terry,OH · 03-03-2021, 12:47 PM

There are two manufactures of the 94 style carburetor for the 1940 Ford. Both Holley and Ford made them. The Holley has a small "H" embossed and the Ford a letter "F" embossed, on the main body over the accelerator pump section. Both are marked 91-99 on the center main body. The top section is unique because it does not have a fuel bowl vent tube in the center of the venturi the bowl vents through a oval hole in the die casting. The internal parts are the same on both Carbs. so one rebuilding kit will repair either Carb. If you want an original Carb. Look to a rebuilder such as Charlie Schwindler in NY. Daytona in Florida sells a good rebuilding kit for the DIY.

03-03-2021, 12:47 PM	#45
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: My first dumb question There are two manufactures of the 94 style carburetor for the 1940 Ford. Both Holley and Ford made them. The Holley has a small "H" embossed and the Ford a letter "F" embossed, on the main body over the accelerator pump section. Both are marked 91-99 on the center main body. The top section is unique because it does not have a fuel bowl vent tube in the center of the venturi the bowl vents through a oval hole in the die casting. The internal parts are the same on both Carbs. so one rebuilding kit will repair either Carb. If you want an original Carb. Look to a rebuilder such as Charlie Schwindler in NY. Daytona in Florida sells a good rebuilding kit for the DIY.