The Ford Barn - View Single Post

billybronco1 · 10-12-2020, 01:36 PM

You guys probably will cringe at this but, I tried to free a few of the nuts and I'm afraid I will break a stud. One stud above the hole with the anti freeze in it is rusty and does not feel good when I try to loosen it with the breaker bar. My gut is the stud is leaking. Is every one against trying an engine block sealer? The leak seems to be very minor and probably only when its cold. I do need to do some more experiments.

10-12-2020, 01:36 PM	#32
billybronco1 Senior Member Join Date: Dec 2012 Location: MA Posts: 570	Re: Found Very Concerning Issue You guys probably will cringe at this but, I tried to free a few of the nuts and I'm afraid I will break a stud. One stud above the hole with the anti freeze in it is rusty and does not feel good when I try to loosen it with the breaker bar. My gut is the stud is leaking. Is every one against trying an engine block sealer? The leak seems to be very minor and probably only when its cold. I do need to do some more experiments.