The Ford Barn - View Single Post

columbiA · 09-25-2013, 11:45 AM

I use a 30-amp breaker mounted on engine side of starter switch.It is a tin box with 2 threaded studs for wires & a flat 2- hole mount for the starter switch mounting screws.The mounting hole on one end had to be notched for the slightly wider spacing of the switch mount screws.Most people try to avoid "Vintique" products.

09-25-2013, 11:45 AM	#11
columbiA Senior Member Join Date: Nov 2011 Location: B.C. Canada Posts: 1,746	Re: Vintique Fuse Block I use a 30-amp breaker mounted on engine side of starter switch.It is a tin box with 2 threaded studs for wires & a flat 2- hole mount for the starter switch mounting screws.The mounting hole on one end had to be notched for the slightly wider spacing of the switch mount screws.Most people try to avoid "Vintique" products.