[Burgamot]

I am working on a late 31 fordor and having the same problem. When i was taking body off the frame i noticed only one bole in the cowl bracket had a bolt. when i had the body off i checked all the bolt hole locations against dimentions for a 30-31 tudor they matched up except for the two holes in the cowl. only one lined up. everything else did fit. what i did was to weld a angle iron ahead if the bracket. appears steve and bill were correct that the late frames were made for other bodies.did i do the right thing in adding another attach point or left it alone? (I tried to attach a photo of what i did but with my limited computer skill could not do it)