The Ford Barn - View Single Post

Tom Wesenberg · 08-08-2013, 02:18 PM

There is one more "end play adjustment" on the steering. On the 7 tooth, you can remove shims if you can push & pull the steering wheel and feel movement. On the 2 tooth you loosen the clamp for the column to the gear, then loosen the lock nut, then lightly snug the slotted screw to drive the upper bearing race closer to the bottom.

08-08-2013, 02:18 PM	#20
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: End play adjustment screw There is one more "end play adjustment" on the steering. On the 7 tooth, you can remove shims if you can push & pull the steering wheel and feel movement. On the 2 tooth you loosen the clamp for the column to the gear, then loosen the lock nut, then lightly snug the slotted screw to drive the upper bearing race closer to the bottom.