[Allanw]

We've found driving without indicators and decent brake lights a bit daunting (especially since after our last drive, we discovered the rear light doesn't go at all now!)

We've bucklaed under the pressure, and are going to drill the 3 holes in the other fender to add another tail light.

I'm going to install a repro bracket, and tail light with amber top on each side. I'm also going to ad a 32(?) tail liaght on each side (the ones with one big read lens).

The amber section will be the indicator, the tails will remain the same, and the 32 light will be the brake light.

It will be a bit messy, but the lights are at least from the correct "period" and are similar in design.

I think I'll get a pair of 30's comercial cowl lights for the front indicators, and ad amber bulbs to them.

Hopefully it looks OK :-)

Cheers,