View Single Post
Old 04-26-2021, 05:51 PM   #5
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,771
Default Re: how to check rear wheel bearings

Any in and out movement you feel is just the clearance in the differential gears. Movement is normal. Do not get aggressive if you try to pull the drum/ hub off. They are usually very hard to get off. Do not beat on the axle end. You are just beating on the gears. It takes a special puller to get them off.
Andy is offline   Reply With Quote