The Ford Barn - View Single Post

Mercury Guy · 02-17-2015, 11:33 AM

Thanks guys for the input, I've already planned to go electric fan, but I've used the generator mount to mount a Ford 40 amp. alternator. I can build most anything with my machine experience and tools, so I'll have no problem to build a PS pump mount! My problem is the actual mounting of the linkage and box. The model "A" conversion uses a steering arm on the passenger side with two tapered holes for the cross shaft from the steering box, and the tie rod connecting to the left wheel. The arm for the knuckle connects different on the 3 ton than it does on the pickups.

02-17-2015, 11:33 AM	#9
Mercury Guy Junior Member Join Date: Feb 2015 Location: New Brunswick(Eastern Canada) Posts: 11	Re: Mercury Truck stuff Thanks guys for the input, I've already planned to go electric fan, but I've used the generator mount to mount a Ford 40 amp. alternator. I can build most anything with my machine experience and tools, so I'll have no problem to build a PS pump mount! My problem is the actual mounting of the linkage and box. The model "A" conversion uses a steering arm on the passenger side with two tapered holes for the cross shaft from the steering box, and the tie rod connecting to the left wheel. The arm for the knuckle connects different on the 3 ton than it does on the pickups.