The Ford Barn - View Single Post

skidmarks · 11-22-2015, 08:43 AM

Its also easy to turn the shaft down to a interference press fit. Press it into the shaft coupler at the pinion end and weld it . Have also seen some done with a slot milled into the side of the shaft coupler for more weld area. I have done a bunch of them this way with no issues.

11-22-2015, 08:43 AM	#8
skidmarks Senior Member Join Date: Aug 2010 Location: newark, delaware Posts: 3,735	Re: Resplining a solid driveshaft Its also easy to turn the shaft down to a interference press fit. Press it into the shaft coupler at the pinion end and weld it . Have also seen some done with a slot milled into the side of the shaft coupler for more weld area. I have done a bunch of them this way with no issues.