The Ford Barn - View Single Post - Are 1930 Fenders the same on 1930/31 Tudor and Roadsters

Kevin in NJ · 10-10-2016, 11:59 AM

Fenders for 30-31 are the same basically...BUT

Fenders for the two piece apron will not have bolt holes as the extra section was welded to a lip that is usually shorter then found on the 31 fenders that were bolted.

Also keep in mind there are 2 styles of fenders. One has the crease running further back causing a bit more of a curve as you get to the running board. Kind of hard to see unless you are looking at the 2 different fenders side by side. I am told there is a known original untouched car with one of each type on it.

10-10-2016, 11:59 AM	#2
Kevin in NJ Senior Member Join Date: May 2010 Location: South East NJ Posts: 3,398	Re: Are 1930 Fenders the same on 1930/31 Tudor and Roadsters Fenders for 30-31 are the same basically...BUT Fenders for the two piece apron will not have bolt holes as the extra section was welded to a lip that is usually shorter then found on the 31 fenders that were bolted. Also keep in mind there are 2 styles of fenders. One has the crease running further back causing a bit more of a curve as you get to the running board. Kind of hard to see unless you are looking at the 2 different fenders side by side. I am told there is a known original untouched car with one of each type on it.